Wednesday 22 July 2009

LGA 775 (Intel Pentium 4, Pentium D, Celeron, Core 2 Duo)


Intel's response to power consumption problems on its highest-speed Pentium 4 models was a band-aid approach, giving the processor more power connections rather than fixing the cause. But the Land Grid Array didn't simply increase pin-count, as the pins were removed from the processor and replaced with flexible contacts in the socket. These contacts can be very fragile, and repeated rebuilds have left many testers with dead boards. Yet the one thing LGA 775 still has going for it is Intel's decision to use it in future Core 2 Duo desktop processors, but only using the latest board revisions. Buyers will want to make certain they're getting a compatible motherboard revision before spending any money.
Supporting the highest-performance processors using the latest motherboard revisions, and with the ability to last at least through several careful rebuilds, LGA775 is an excellent choice for performance enthusiasts. It will also host Intel's first quad core Kentsfield processor later this year, but a bus speed increase to 333 MHz (FSB1333) is likely, so you will need a new motherboard.

Download Asus IPILP-AR Motherboad Driver Drivers


Download Asus IPILP-AR Motherboard Driver Drivers. Motherboard manufacturer’s name: Asus IPILP-AR Motherboard Intel Socket 775.

This download is a driver/drivers providing Microsoft Windows XP /Vista support for IPILP-AR Motherboard. View the site link below if you want to download latest motherboard, BIOS, audio, sound, chipset, usb, video, Integrated graphics, lan ethernet, driver/drivers.

Help: If the download cannot start, Please refresh page (press F5 or ctrl+F5 in your Browser or click the ‘Refresh’ button in … Web Browser.

To install this pack driver

  1. Download the file onto your local hard disk.
  2. Close all other Windows applications.
  3. Follow the instructions on the screen.

Intel's power-guzzling V8


Intel is getting ready to launch the full-sized SUV of desktop motherboards. Expected later this quarter, the Skulltrail board packs two quad-core 130-watt QX9775 processors--which Legit Reviews said sucked up to a whopping 351 watts. In short, this is not the MacBook Air. The tiny processor in that power-stingy computer sips a mere 20 watts.

Skulltrail pulls out all the stops. It has dual 1600-MHz front side-buses connected to dual Xeon sockets and four full PCIe x16 slots, with planned support for up to four high-end graphics boards. And Xeon processors running on Skulltrail boards have been demonstrated by Intel running at 4.0GHz.

Is all of this really necessary? Or is it just a PR stunt with only a few hardened gamers snapping up the limited supply of Skulltrails. Apparently it's more than PR because Skulltrail reviews, driven by popular demand, are everywhere. TechRadar has one, [H]Enthusiast has one, Anandtech has one...and the list goes on.

Skulltrail's genesis (it was originally dubbed "V8") is sketchy but some in the tech community believe the board was created in response to AMD's Quad FX platform which, in turn, was created in response to Intel's quad-core desktop CPUs. But AMD's Quad FX was unceremoniously terminated so that question may be moot now. For those interested in seeing one in action, here's a slightly dated (January 8) Intel video showing Skulltrail running various games.


abit unveil IP35P OverSpeed Edition


he once dominant motherboard manufacturer abit has just launched a new enthusiast oriented motherboard based on Intel's P35 chipset, this dubbed the IP35P OverSpeed Edition.

The board is ready to take the next generation of 45nm processors from Intel with up to 1333 FSB support, and in OC mode it supports DDR2 memory up to 1066 MHz. On the downside there's only one PCIe x16 slot, two PCIe x1 slots and three legacy PCI, so short of buying a single dual-GPU graphics card (3870 X2 etc.) there'll be no Crossfire happening on this offering.

The other oddity is that for an apparent overclockers board, abit's choice not to move to solid state capacitors is somewhat alarming by todays standards.


Intel DX48BT2 Extreme Series Motherboard


The Intel DX48BT2, formerly codenamed Bone Trail, is targeted at enthusiasts and gamers.

It is the first Intel board to support 1,600MHz frontside bus (FSB) — the interconnect between processor and RAM — for even faster memory access and extra room for overlocking.

The Intel DX48BT2 will support the latest Core 2 Extreme processors, including the new quad and dual-core chips, as it utilises the X48 Express chipset.

Of the four memory sockets, two support up to 4GB memory at a whopping 1,600MHz speed but if all four sockets are used the board will support up to 8GB but at slower speeds of 1,333/1,066/800MHz.

Gamers will have a lot of ports at their disposal as the board has two Firewire ports, 12 USB ports, three PCI-e slots (of which two are full-speed PCI-e 2.0 slots), 2 PCI expansion slots, and six SATA 3.0 Gbps (gigabits per second) ports.

The board also supports Intel Matrix Storage Technology which allows multiple hard disks to be used in a RAID (Redundant Arrays of Inexpensive Disks) configuration either for faster speed or increased reliability.


Motherboard for Intel P4 Processor OR-MB8ID533


Product Description

Socket 478 for Intel FC-PGA2 Pentium 4 processor in 478
400 MHz FSB
Intel 845 chipset consists of intel memory controller
Hu (MCH) and the Intel I/O Controller Hub 2 (ICH2)
TE 8702 I/O chip
AC97 codec
Front side bus 400MHz
3 x 168-pin DIMM slot supports up to 3GB PC100/133 SDR-SDRAM
IDE1 and IDE 2 supports PIO mode 3, 4, UDMA ATA 100/66 IDE
1 x FDD 2 x USB ports by cable rDA TX / RX header
Expansion slots
Q-Flash @-BIOS
Includes 3 fan power connectors
Poly fuse for keyboard over-current protection
Gigabyte windows utility manager

HS Code: 84714910
Trademark: Orink
Model: OR-MB8ID533
Company: Shanghai Unicom Infotech Int'L Ltd.

Sunday 5 July 2009

Gigabyte Launches EP45 Mobo Range


Gigbyte has announced the launch of the EP45-Extreme series of motherboards that target the extreme overclocking segment of the motherboard market. The series currently consists of the GA-EP45T-EXTREME for DDR3 users and the GA-EP45-EXTREME for those who still prefer using DDR2 memory; both motherboards are based on Intel’s latest P45 Express chipset.
Designed for extreme overclocking performance, the EP45-EXTREME series of motherboards supports Intel multi-core processors up to FSB 1600MHz, including the latest Intel 45nm processors. Other high bandwidth features include support for ATI CrossFireX Technology with 2 PCI Express 2.0 x 8 interfaces and dual LAN with teaming functionality for ultra bandwidth for gaming servers.

The motherboards utilize Gigabyte’s unique Hybrid Silent-Pipe slot cooling system. This utilizes the natural convection of air inside and outside the chassis to cool down the North Bridge, South Bridge and CPU MOSFETs without the use of a fan. The Gigabyte Hybrid Silent-Pipe can also be used with water block cooling systems for additional enhanced thermal performance, or alternatively it can be totally removed by experienced overclockers who wish to use a copper pot with dry ice or LN2 extreme cooling on the North Bridge.

For system information, the EP45-Extreme boards incorporate an 80 Port Debug LED, overclocking alert LEDs, overvoltage alert LEDs and also temperature alert LEDs. There are five blue overclocking alert LEDs that indicate from a minimal overclock with only one LED burning to a high overclock with five LEDs burning. There are three overvoltage alert LEDs that indicate a slight overvolt when the green one burns, a moderate overvolt when the yellow one burns and a high overvolt when the red one burns. Finally, there are two temperature LEDs that burn green when the CPU and North Bridge area temperature is between 61oC and 80oC and red when the area is above 80 degree C.